Made in the USA – Finest quality materials and workmanship

Input Power Draw: 1000W
Input Voltage Range: 90-305 VAC

120 VAC Current Draw: 8.4 Amps
208 VAC Current Draw: 4.8 Amps
240 VAC Current Draw: 4.2 Amps
277 VAC Current Draw: 3.6 Amps

Power Drivers: 2 x Mean Well HLG-480H-48B
AC Power Cord Length: 6.5 ft
DC Extension Cord Length: 7 ft
Dimming Range: 5-100%

Light Engine Efficacy: 3.26 μmole/J – 2.73 μmole/J
Power Driver Efficiency: 95% @ 230 VAC
Full System Efficacy: 3.08 μmole/J – 2.58 μmole/J

Light Bar LED Information:
Samsung 3000K White LEDs – 140 per Light Bar
Samsung 5000K White LEDs – 140 per Light Bar
660nm Deep Red LEDs – 15 per Light  Bar

Operating Temperature Range: 41°F – 95°F | 5°C – 35°C
Operating Humidity Range: 10 – 90% Non-Condensing
Generated Heat Load: 3,412 BTU/Hour

Water Protection: Currently the Growcraft has no protective coating against direct moisture exposure. If moisture accumulates near the LEDs damage may occur. Make sure to point any sprays downward and away from the LEDs.

Use of VOC (Volatile Organic Compounds): DO NOT USE VOCs, like burning sulfur, near any Growcraft. This can damage the LEDs beyond repair and is NOT covered by our warranty.

Minimum Head Space Above Fixture: 10 in
Recommended Hanging Height: 18-30 in
Recommended Grow Room Ambient Air Temperature: 85°F | 29.5°C
Coverage Area: 5 x 5 ft
Start Slow – Growcraft lights have VERY high light output and unless your plants are already acclimated to high light intensity, it is best to start slow with the light hanging high and possibly also dimmed. Then monitor plant reaction over a few days and slowly adjust as needed.